Heaters
Gravity-Vented Unit Heaters
Due to its low cost and compact design, Modine’s PD propeller unit heater is the logical choice for many unit heater applications. The model PD is a gas-fired, gravity-vented propeller unit heater that provides application versatility, ease of installation, low installed cost, long life and excellent heat-throw. Designed for overhead-suspended mounting, this heater only requires venting, gas and electric service connections prior to operation.
Propeller fan units are classified as zero-static-pressure type, and should not be used with velocity-generating discharge nozzles or ductwork connections.
The model BD blower is a gas-fired, gravity-vented blower unit heater, and is usually selected in place of the model PD for one or more of the following reasons:
- To overcome static pressures.
- Where several rooms or areas are to be served by a remote heat source.
- To provide heat, filtered air and ventilation, all from a single source.
- When quiet operation is important.
- For zone control over heating and ventilation.
- For spot heating or high mounting-heights where special discharge nozzles may be required.
Contact 864.388.0380 or exccel@earthlink.net for Model BD blower.
Features
- 80% thermal efficiency
- Gravity vented
- Natural gas or propane fuel models
- Available in blower models
- Available with fuel-saving Intermittent Pilot Ignition- ?
- 230 volt single or 3-phase available
Options
Natural or Propane Gas
Blower and motor enclosures
Combination filter-rack and duct connections
Velocity-generating nozzles
Deflector hoods
Controllers
| MODEL | OUTPUT |
PRICE |
PRICE WITH BLOWER |
||
|---|---|---|---|---|---|
| PD75 Natural Gas | 75,000 BTU |
$558.00 |
 This item ships Freight COD. |
$895.00 |
This item ships Freight COD. |
| PD100 Natural Gas | 100,000 BTU |
$630.00 |
This item ships Freight COD. |
$950.00 |
This item ships Freight COD. |
| PD125 Natural Gas | 125,000 BTU |
$675.00 |
This item ships Freight COD. |
$1050.00 |
This item ships Freight COD. |
| PD150 Natural Gas | 150,000 BTU |
$715.00 |
This item ships Freight COD. |
$1100.00 |
This item ships Freight COD. |
| PD175 Natural Gas | 175,000 BTU |
$765.00 |
This item ships Freight COD. |
$1185.00 |
This item ships Freight COD. |
| PD200 Natural Gas | 200,000 BTU |
$816.00 |
This item ships Freight COD. |
$1235.00 |
This item ships Freight COD. |
| PD250 Natural Gas | 250,000 BTU |
$913.00 |
This item ships Freight COD. |
$1410.00 |
This item ships Freight COD. |
| MODEL | OUTPUT |
PRICE |
PRICE WITH BLOWER |
||
|---|---|---|---|---|---|
| PD75 Propane Gas | 75,000 BTU |
$558.00 |
This item ships Freight COD. |
$895.00 |
This item ships Freight COD. |
| PD100 Propane Gas | 100,000 BTU |
$630.00 |
This item ships Freight COD. |
$950.00 |
This item ships Freight COD. |
| PD125 Propane Gas | 125,000 BTU |
$675.00 |
This item ships Freight COD. |
$1050.00 |
This item ships Freight COD. |
| PD150 Propane Gas | 150,000 BTU |
$715.00 |
This item ships Freight COD. |
$1100.00 |
This item ships Freight COD. |
| PD175 Propane Gas | 175,000 BTU |
$765.00 |
This item ships Freight COD. |
$1185.00 |
This item ships Freight COD. |
| PD200 Propane Gas | 200,000 BTU |
$816.00 |
This item ships Freight COD. |
$1235.00 |
This item ships Freight COD. |
| PD250 Propane Gas | 250,000 BTU |
$913.00 |
This item ships Freight COD. |
$1410.00 |
This item ships Freight COD. |
FOR ALL MODELS
When ordering heater, add Intermittent Pilot Ignition, if desired.
| MODEL | DESCRIPTION | PRICE | |
|---|---|---|---|
| 115V30 | INTERMITTENT PILOT IGNITION | $75.00 | |
Horizontal Oil-Fired Unit Heaters
Modine oil-fired unit heaters are built with time-tested and field-proven components, all properly combined and balanced to provide optimum comfort and heating efficiency. The long-life heat exchanger is made of corrosion-resistant, aluminized steel and is roll-formed to eliminate thermal stress. It contains a preformed, ceramic fiber fire-pot that is lightweight, resilient, and resists both mechanical and thermal shocks.
The oil burner is a reliable, pressure-atomizing gun-type equipped with a stainless steel, diestamped flame-retention head. The flame produced can increase combustion efficiency by as much as 20 to 30 percent over non-flame retention-type burners. Safe, automatic operation is assured by additional features such as a cad-cell safety shut-off system, electric-spark ignition, fan and limit control and a finger-proof fan guard.
Easy to install and service, each oil-fired unit heater is factory assembled, wired, and firetested prior to shipment. Ease of service is achieved by equipping the heat exchanger with an inspection port, two clean-out ports, and an amply-sized service door for removing fire pot when replacement becomes necessary.
The oil-fired unit casing is treated for protection against corrosion prior to the application of the attractive gray-green, baked-on enamel finish.
Features
- Aluminized steel heat exchanger
- Electric-spark ignition
- Utilize #1 or #2 fuel oil
- Propeller fan with guard
Options
Fuel Oil, #1 and #2
| MODEL | OUTPUT | PRICE | |
|---|---|---|---|
| POR100 | 100,000 BTU | $2345.00 | This item ships Freight COD. |
| POR145 | 145,000 BTU | $2378.00 | This item ships Freight COD. |
| POR185 | 185,000 BTU | $2568.00 | This item ships Freight COD. |
Orders less than $100 will be invoiced with a $25 handling fee. Prices subject to change without notice. Shipping charge may be adjusted. On all purchases outside the lower 48 U.S. states, any duty/taxes will be applied. Prices and terms are restricted to internet sales/orders only; all communication is to be conducted through e-mail only.
